Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 22:09 23 Jan 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : CMM2 G2 V2 design files

     Page 5 of 5    
Author Message
ManiB
Senior Member

Joined: 12/10/2019
Location: Germany
Posts: 141
Posted: 07:11am 12 Jan 2026
Copy link to clipboard 
Print this post

  phil99 said  I feel like I am reading the script for a Python sketch.
Clearly the hole is too small for a standard plug, so make the hole big enough for the plastic molding of a standard plug!


Yes, you're right, I'll put the back panel at the front and make a larger opening in my next production run.

But anyone who can edit STL files can do that themselves ;)

CMM2G2V2_STL_Panels.zip


Here are the Gerber files for my panels (where the USB-C openings are still too small).

Gerber files for the front panel:
FRONT_CMM2G2V2ends_250526.zip

Gerber files for the back panel
BACK_CMM2G2V2ends_250526.zip

I have documented the links in my blog post , where I also describe how to have the circuit boards manufactured by JLCPCB.

That would be my suggestion for a new, suitable opening:


Edited 2026-01-12 19:00 by ManiB
 
     Page 5 of 5    
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026