 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : I updated Chrome and can't open TheBackShed
| Author | Message | ||||
| Pluto Guru  Joined: 09/06/2017 Location: FinlandPosts: 375 |
Updated Chrome today and it refuses to open www.thebackshed.com. The hints it gave suggested that thebackshed was not in operation. Waited and tried again with same results. Chrome suggests also that thebackshed is not secure. Tried to change security settings w/o success. Finally I tried with Firefox (which I almost never use) and it had no problem at all to connect. Any idea what I should do in Chrome to get it opened there? Pluto |
||||
twofingers Guru Joined: 02/06/2014 Location: GermanyPosts: 1576 |
There was a server problem(?) this afternoon. Regards Michael I use Chrome without any issues. Edited 2024-12-13 02:30 by twofingers causality ≠ correlation ≠ coincidence |
||||
| Pluto Guru Joined: 09/06/2017 Location: FinlandPosts: 375 |
What a coincident! -Server problem just when I updated Chrome -Server problem solved just when I switched to Firefox Now it works also for me in Chrome!  Good start for conspiracy theory!  Pluto |
||||
| twofingers Guru Joined: 02/06/2014 Location: GermanyPosts: 1576 |
  causality ≠ correlation ≠ coincidence |
||||
Gizmo Admin Group  Joined: 05/06/2004 Location: AustraliaPosts: 5116 |
I wasn't aware of a server problem, could anyone give me the time ( GMT ) is happened so I can have a look through the log files? Glenn The best time to plant a tree was twenty years ago, the second best time is right now. JAQ |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 10246 |
About 15:00 GMT for at least an hour |
||||
Chopperp Guru Joined: 03/01/2018 Location: AustraliaPosts: 1096 |
Glenn There was an NBN Co outage notification for our area from midnight to 4am this morning QLD time. I didn't detect anything abnormal at my place though. Brian Edited 2024-12-13 10:04 by Chopperp ChopperP |
||||
| lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3359 |
Inaccessible to me in Florida from about 8am EST to noon or later (about 1pm GMT to 5pm). PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
| al18 Senior Member  Joined: 06/07/2019 Location: United StatesPosts: 228 |
I couldn’t access this forum for a couple of hours also. |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 7871 |
I blame the Russians / Americans / Chinese / North Koreans / Luton Airport baggage handlers / Birmingham Upholsterer's Union Ladies Division Lacrosse Team (Please delete as appropriate). Yes, we lost access here too, I couldn't give times though. Sorry. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
Revlac Guru Joined: 31/12/2016 Location: AustraliaPosts: 1153 |
Qantas employee tripped over cable and pulled the plug out......wanted to go home early. Cheers Aaron Off The Grid |
||||
| Pluto Guru Joined: 09/06/2017 Location: FinlandPosts: 375 |
I believe the problem could have occured about 16...17:30 GMT. (Based on the timestamps at the start of this thread.) Nbr 3 with help of nbr 1 on your list has already cut both cables and gaspipes in the baltic sea lately. Maybe they have some ships also in Australian waters. |
||||
andreas Senior Member Joined: 07/12/2020 Location: GermanyPosts: 226 |
I have a statistics about intrusion (tries) into one of my internet available servers calculated on a CMM2. There you can see the highest rank(16) have the Chinese hackers.  -andreas |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
