Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 02:46 29 Aug 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Games for the Pico2

Author Message
Bryan1

Guru

Joined: 22/02/2006
Location: Australia
Posts: 1528
Posted: 07:21am 28 Aug 2025
Copy link to clipboard 
Print this post

G'Day Guy's,

I have looked over 30 pages of this forum also on the FOTS and no signs of any of the the games that will run on the Pico2 so here is a thought lets use this thread to list games  

So if any member want to find a game it will be here.

Regards Bryan
 
Volhout
Guru

Joined: 05/03/2018
Location: Netherlands
Posts: 5187
Posted: 08:30am 28 Aug 2025
Copy link to clipboard 
Print this post

Hi Bryan,

A starting point could be here:

PicoMite VGA games

On page 3 of that thread, there is also a link to my local archive that has many games adapted for PicoMite 6.00.01. Most of these would also run on 6.00.03 or 6.01.00, and on a RP2350 and maybe even on HDMI when it is set to a resolution suitable. This is something I cannot test, since I do not have a working HDMI setup that can use all resolutions.

I plan to update my locale archive to 6.01.00 once 6.01.00 is released (not on beta or rc). I will mention that in the VGA games thread.

Volhout
Edited 2025-08-28 18:34 by Volhout
PicomiteVGA PETSCII ROBOTS
 
Bryan1

Guru

Joined: 22/02/2006
Location: Australia
Posts: 1528
Posted: 09:12am 28 Aug 2025
Copy link to clipboard 
Print this post

Thanks for that Harm  

I did get asked about that package today that I got on Tuesday and when I said I was happy as a pig in dung they laughed. I told them I finally got MP3's going and my intent was getting a shuffle mode going where it already builtin into the code  

Now as I still had the Pico2 going when I came down from my shed I did try both the side winder and the attack3 joy sticks in the USB port and nothing happened so a USB sniffer program may be needed so the controls can be mapped so the old joysticks can be used.

When I mentioned to a girl at the shop it cost about $100 to get 5 of them and I can get the STL file to make the 3D case she was impressed so may get a chance to introduce some locals into the fold. So the kids of today in my area can play and learn.

This is why I started this thread so if one wants to play a game all the info is here and if the thread does off it can go into the the top forum links or be a sticky thread that this forum currently doesn't support.

Regards Bryan
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025