Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 13:56 08 Jan 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Problem with rp2350 firmware,no usb or video out version.

Author Message
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 180
Posted: 05:39pm 06 Jan 2026
Copy link to clipboard 
Print this post

Last night I was playing with an old handheld with a 2350 and an ili9341. Thought I would update the firmware to the newest. It would not boot up? Tried several times with wiping out the device and re-loading. Ok, wondered if there was a problem with just that file. Downloaded it again. Still no go. Started going backward in versions till I could find one that worked. Had to go to version 6.00 to get it to boot. Strange. Went back to the newest and again , no boot? Could there be a problem with just that one file with no usb and no video? I have the newest file working on an HDMI version just fine.
Puzzled......
 
matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 10818
Posted: 06:29pm 06 Jan 2026
Copy link to clipboard 
Print this post

Exactly which firmware version?
 
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 180
Posted: 08:00pm 06 Jan 2026
Copy link to clipboard 
Print this post

I tried 6.02.00 , 6.01.00rc19 , 6.01.00rc24 , 6.01.00rc25 , 6.01.00rc0 . The one that worked was 6.00.02 .
 
TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6426
Posted: 08:18pm 06 Jan 2026
Copy link to clipboard 
Print this post

What Peter wants to know is the exact name of the file
such as:
PicoMiteRP2350V6.02.00RC1.uf2

Jim
VK7JH
MMedit
 
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 180
Posted: 08:42pm 06 Jan 2026
Copy link to clipboard 
Print this post

All were PicoMiteRP2350Vxxxx , the only one meant for no video and no USB keyboard.
 
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 180
Posted: 08:43pm 06 Jan 2026
Copy link to clipboard 
Print this post

All the VGA and HDMI versions I have tried work just fine. I don't use the WEB version ones , at least not yet.
 
matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 10818
Posted: 10:02am 07 Jan 2026
Copy link to clipboard 
Print this post

I've just been bug fixing using what is now PicoMiteRP2350V6.02.00RC2.uf2 and it works absolutely perfectly on a standard Pico2. What H/W are you using? Clear the flash completely using the clear_flash.uf2 in the download and then install RC2
 
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 180
Posted: 10:34pm 07 Jan 2026
Copy link to clipboard 
Print this post

Ok , I found that version , tried it and success!  Went back and re-tried 5 other versions and no go. I have the new one loaded and running so thank you very much. It was a SeeedStudio board , the short one.
 
gadgetjack
Senior Member

Joined: 15/07/2016
Location: United States
Posts: 180
Posted: 11:32pm 07 Jan 2026
Copy link to clipboard 
Print this post

Never mind. My board is crap. I tried another pico2 board and no faults at all. Sorry for the fault.
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026