 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Will Adafruit Fruit Jam run PicoMite 6?
| Author | Message | ||||
| al18 Senior Member  Joined: 06/07/2019 Location: United StatesPosts: 243 |
The Adafruit Fruit Jam was released in July 2025 and has the 80 pin RP2350B processor, 16 MB Flash, 8 MB PSRAM, HDMI connected thru GPIO12-19 thru HCTX pins, has 2 USB ports connected to a CH334. The Fruit Jam costs $39.95 and is available thru Adafruit and Digikey. Compared to the PicoMite 3 board, it seems to be mostly compatible, with the exception of the I2S audio TLV320DAC3100 I2S DAC and the WiFi which is handled with an ESP32-C6. The MicroSD connections seem significantly different, with the Fruit Jam using GPIO34-39. Don’t know if is a deal breaker. Pinout of the Fruit Jam is at https://learn.adafruit.com/adafruit-fruit-jam/pinout Is the Fruit Jam compatible with the PicoMite 6? |
||||
Mixtel90 Guru  Joined: 05/10/2019 Location: United KingdomPosts: 8919 |
It doesn't seem to be fully compatible with MMBasic to me. But then, I wouldn't expect it to be. Not a good candidate. At $39 I'd consider it to be a waste of money, although you could probably get it to do *something* by customising the options, writing a fey library routines for it and losing GPIO pins. Only my opinion, of course. Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2026 |
