TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 21:16 22 Jul 2026	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : CMM2: Boards available in Australia

Author

Message

rrroonn

Newbie

Joined: 08/02/2026
Location: Australia
Posts: 13

Posted: 03:46am 22 Jul 2026

Copy link to clipboard

Print this post

Hi,

Hopefully not frowned upon

...

I was going to make up some CMM2 computers for the grand-kids but have decided to go another way. I had 5 boards made up by JLCPCB and have soldered the remaining components for the first board to make sure they work. I have loaded 6.beta.13 firmware and tested - everything seems ok to me. "final-flight" was my test run;-)

I dont have enough bits like switches, connectors, for all 5 boards, though I have most bits. I am happy to solder up at least another board but can provide the remainder as they come from JLCPCB or I can get some more bits to complete the boards if someone is desperate for a complete board.

I also have two cases without cutouts. Personally, I was going to 3D print cases for them.

I also have a Gen 1 CMM2 that I bought from ebay (it is complete).

Not trying to make a profit, just cover some of the costs. When they are gone, they are gone.

PM for details if interested.

thanks,

Ron

If all else fails, remain flexible and maintain a sense of humour

Print this page

To reply to this topic, you need to log in.