Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 03:41 15 Sep 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : HDMI WEB question

Author Message
crazycloud
Regular Member

Joined: 20/08/2023
Location: United States
Posts: 43
Posted: 01:25pm 13 Sep 2026
Copy link to clipboard 
Print this post

When I install HDMIWEB, my pico 2350 does not show up as a HID device in Terraterm.
i have tried several pico 2350s, several usb cables.  How do you talk to the pico over USB?  I have tried the last 2 betas of HDMI WEB, no luck. I must be missing something.
 
matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 11850
Posted: 01:30pm 13 Sep 2026
Copy link to clipboard 
Print this post

HDMIWEB uses the USB in host mode. You need a USB/UART connected to GP8/GP9 for the serial console
 
crazycloud
Regular Member

Joined: 20/08/2023
Location: United States
Posts: 43
Posted: 01:35pm 13 Sep 2026
Copy link to clipboard 
Print this post

thank you for the quick response.  I will try that with a usb debug cable.
 
Mixtel90

Guru

Joined: 05/10/2019
Location: United Kingdom
Posts: 9128
Posted: 05:50pm 13 Sep 2026
Copy link to clipboard 
Print this post

You will need to set Tera Term to 115200 baud. That isn't normally the default.
Mick

Zilog Inside! nascom.info for Nascom & Gemini
 
crazycloud
Regular Member

Joined: 20/08/2023
Location: United States
Posts: 43
Posted: 06:39pm 13 Sep 2026
Copy link to clipboard 
Print this post

Thank you.  It works like a champ.  Mode 2 color and wifi. Awesome!
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026