Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 11:33 15 May 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Maximite SM1 RTC Sucess

     Page 4 of 4    
Author Message
asluiter
Newbie

Joined: 23/11/2011
Location: Australia
Posts: 1
Posted: 10:16am 23 Nov 2011
Copy link to clipboard 
Print this post

And here is a small tip for anyone fitting the PCF5863 to the Altronics kit version, make sure you attach SDA to pin 21 of the I/O connector (i.e. I/O pin 12) and SCL to pin 19 of the I/O connector (i.e. I/O pin 13). NOT physical PIC pins 12 and 13 like I did. (i.e. pins 6 & 8 on the I/O connector). Do'h!

 
     Page 4 of 4    
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025