TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 18:34 18 Jul 2025	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : How To Protocol Analyzer IR etc

Author

Message

Ray B
Senior Member

Joined: 16/02/2007
Location: Australia
Posts: 219

Posted: 03:38am 01 Feb 2013

Copy link to clipboard

Print this post

Found this interesting link for those wanting to crack or better understand serial strings from Infra Red Remotes and possibly Wireless Remotes using free software and some basic interfacing into a PC audio port.

Refer to following: http://wiki.nethome.nu/doku.php/analyzer/start

To quote from the downloadable manual:......
The protocol Analyzer Tool is intended to help analyzing and decoding slow pulse based protocols such as IR-remote protocols and RF lamp switch protocols. The Analyzer has protocol decoders for a number of standard protocols and can decode the parameters from them. It can also help analyzing the signals of unknown protocols and help in building decoders for new protocols.

Enjoy

RayB from Perth WA

Ray B
Senior Member

Joined: 16/02/2007
Location: Australia
Posts: 219

Posted: 04:11am 01 Feb 2013

Copy link to clipboard

Print this post

And yet another version from different source ...
http://ostan.cz/IR_protocol_analyzer/
Cheers

RayB from Perth WA

MOBI
Guru

Joined: 02/12/2012
Location: Australia
Posts: 819

Posted: 11:33am 01 Feb 2013

Copy link to clipboard

Print this post

The PS2 KBD to 8 bit parallel or I2C I designed (and built and tested) has a firmware option (software selectable between PS2 or IR) to read the "Standard" 4 byte TV remotes if any interest. Willing to share what I found.

David M.

Print this page

To reply to this topic, you need to log in.