Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 17:18 22 Jul 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : SPI question

Author Message
vk4tec

Senior Member

Joined: 24/03/2012
Location: Australia
Posts: 239
Posted: 06:05pm 28 Jun 2013
Copy link to clipboard 
Print this post

Hello

I had a max7910 working with a 8 digit 7 seg led display with duinomite

I now intend to use maximite mini instead

Are the commands likely to be the same ?

For SPI comms ?

Andrew
Andrew Rich VK4TEC
www.tech-software.net
 
MM_Wombat
Senior Member

Joined: 12/12/2011
Location: Australia
Posts: 139
Posted: 01:55pm 29 Jun 2013
Copy link to clipboard 
Print this post

Andrew,

Short answer --Yes..

After looking at the MMBasic program from this Thread you wrote.


I used 3 Austria Microsystems AS1107 to control 3 8x8 led displays, my MMBAsic program is on this thread . Coded for a Mono MM. Very similar, but mine displayed text.

Dennis
Keep plugging away, it is fun learning
But can be expensive (if you keep blowing things up).

Maximite, ColourMaximite, MM+
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025