 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : APRS iGate
| Author | Message | ||||
vk4tec Senior Member  Joined: 24/03/2012 Location: AustraliaPosts: 239 |
Hello I am a ham radio operator and I am usng a Raspberry Pi to + Go from serial packets to send to a central server Is there a DuinoMite or something that do the same thing ? 1. Accept serial string ended by <CR> 2. Telnet to a server and on send the string ? - Andrew VK4TEC - Andrew Rich VK4TEC www.tech-software.net |
||||
bigmik Guru  Joined: 20/06/2011 Location: AustraliaPosts: 2946 |
Hi Andy, Drop an email to Tsvetan at Olimex.com as he, in development stages of the DM eMega, had a TELNET client running on a DM that we could telnet to and interrogate... Maybe he still has the code handy and or some tips... Of course this was either a `special' or the DMbasic version of MMBasic. Regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
