Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 16:06 17 Sep 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : MM+ Editor Bug?

Author Message
WhiteWizzard
Guru

Joined: 05/04/2013
Location: United Kingdom
Posts: 2948
Posted: 02:37am 29 Aug 2016
Copy link to clipboard 
Print this post

Can others please check the following . . . .

Setup is an E100 with TFT and PS2 running as a standalone system.
Within the editor I am editing some code and using cursor keys to move the cursor around the code.
IF I have an underscore character (i.e. as part of a variable name), then the cursor 80% of the time will remove the underscore character from the screen (but it is still there: exit editor, then re-enter, and underscores come back!)

Happens in any of the four directions but not every time.

Can others try this, AND also if anyone has a USB connection to something like TeraTerm see if it removes underscore character(s) from either/or the TT screen and TFT console screen

Thanks,

WW
 
dhester
Newbie

Joined: 17/07/2016
Location: United Kingdom
Posts: 11
Posted: 04:27am 29 Aug 2016
Copy link to clipboard 
Print this post

WW

I have tried this with both TeraTerm connected and without

I get the same results. I.E the variable I use is t_demo and the underscore disappears on the tft but not on the serial connection.

If no serial connection the underscore disappears.

The underscore disappears all the time on my little demo.

Does this help.
 
dhester
Newbie

Joined: 17/07/2016
Location: United Kingdom
Posts: 11
Posted: 04:30am 29 Aug 2016
Copy link to clipboard 
Print this post

WW

Just tried again and if I cursor around the underscore disappears but when I get to the end of a line and hit return the underscore reappears.

Hadn't noticed this before as I am fairly new to micromite.
 
WhiteWizzard
Guru

Joined: 05/04/2013
Location: United Kingdom
Posts: 2948
Posted: 04:38am 29 Aug 2016
Copy link to clipboard 
Print this post

Thanks David - yes it helps to know it is nothing 'unique' to me.

Geoff will pick up on this - just a 'cosmetic' bug so nothing major.

 
Geoffg

Guru

Joined: 06/06/2011
Location: Australia
Posts: 3303
Posted: 10:42am 29 Aug 2016
Copy link to clipboard 
Print this post

Thanks Phil, I can guess what is causing this and I will fix it in the next release.
Geoff Graham - http://geoffg.net
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025