 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : what model of 5" TFT SSD1963
| Author | Message | ||||
f1fco Senior Member  Joined: 18/03/2012 Location: FrancePosts: 155 |
hello to all, can you send me a serious link on ebay to buy a 5" SSD1963 who works perfectly on an Explore 100 board ? and does it exist a 10" SSD1963 who work on MM+ ? thank you for answer Pierre, from Nimes, south of France. 73s de F1FCO |
||||
| Phil23 Guru  Joined: 27/03/2016 Location: AustraliaPosts: 1667 |
Hi, I can only give feedback on the ones I bought Seem fine. The recommendation probably came from oneone else on here. Phil. |
||||
Geoffg Guru Joined: 06/06/2011 Location: AustraliaPosts: 3308 |
That is quite cheap. Does it have the backlight control options as shown below? 
Geoff Graham - http://geoffg.net |
||||
| Phil23 Guru Joined: 27/03/2016 Location: AustraliaPosts: 1667 |
Yes, it has the 3 back light options. Have changed them both to 1963_PWM. The 7" I have wasn't a whole lot dearer, $61.00AUD ($41.00US). 7" TFT Phil. |
||||
| f1fco Senior Member Joined: 18/03/2012 Location: FrancePosts: 155 |
thank you Phil and Geoff I have ordered one 5" 2 or 3 weeks to wait... Pierre 73s de F1FCO |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
