TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 16:07 06 Jul 2025	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Sdd1963 problems

Author

Message

lew247

Guru

Joined: 23/12/2015
Location: United Kingdom
Posts: 1702

Posted: 01:17am 08 Oct 2016

Copy link to clipboard

Print this post

Has anyone had the problem where the display on the SDD1963 has suddenly gone pure white and nothing else is showing?
Anyone know how to fix it?
I've been running a test program on it for a few weeks now and overnight it came up with a pure white screen
If I press control C I get the Micromite prompt ON THE COMPUTER, if I pull the power and plug it back in, and if I press the reset button I get the Micromite welcome screen ON THE COMPUTER, but when I type run I get nothing
The white screen never changes

matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 10209

Posted: 01:29am 08 Oct 2016

Copy link to clipboard

Print this post

Probably a loose/broken connection on one of the data pins. I happen to have just seen the same thing when I was patch wiring a display and got D0 and D1 connected to the wrong pins

lew247

Guru

Joined: 23/12/2015
Location: United Kingdom
Posts: 1702

Posted: 01:40am 08 Oct 2016

Copy link to clipboard

Print this post

The MMboard is connected solidly and hasn't moved in weeks, it just happened overnight
I did check all connections and they all seem ok
The one thing that mmight have "helped" cause it - is the double sided tape holding the display to the SDD circuit board failed during the week and the display "flopped" forward
I taped it back on with new tape and it was working fine, but im wondering if it might have damaged the ribbon
Guess there's no way to test that

Just checked reloading the program and there's no problems there, I guess a new display is next on the shopping list

EDIT just noticed heading is wrong, its an SSD1963Edited by lew247 2016-10-09

Print this page

To reply to this topic, you need to log in.