 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : jaycar 240x320 lcd controller ?
| Author | Message | ||||
| isochronic Guru  Joined: 21/01/2012 Location: AustraliaPosts: 689 |
Jaycar is flogging a small LCD arduino-style, 240x320, 8bit parallel. But I can't see what controller chip it uses, any one with more info ? |
||||
| Lightrock Newbie  Joined: 19/05/2014 Location: AustraliaPosts: 26 |
The Jaycar website has software and data sheets available to download under the Downloads tab on their XC4360 LCD page. A quick look at the data sheet indicates that the LCD is a 16 bit data type rather than SPI. |
||||
| isochronic Guru Joined: 21/01/2012 Location: AustraliaPosts: 689 |
[It is XC4630] The pinout gives 8 data pins in parallel + some control pins, says the controller chip supports scrolling, but not a lot else edit - ie not much further info. I am guessing it is a generic ILI9341 which would be good |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 10209 |
The display is ILI9341 parallel - I don't have a current driver for this and at that price it isn't competitive with the 4.3" SSD1963 which is fully supported by the MM+ |
||||
disco4now Guru Joined: 18/12/2014 Location: AustraliaPosts: 1000 |
See the post below for a loadable ILI9341 parallel driver based on Peter's previous code. ILI9341 parrallel driver Latest F4 Latest H7 FotS |
||||
| isochronic Guru Joined: 21/01/2012 Location: AustraliaPosts: 689 |
Thanks, that keeps a few options open |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
