Home
JAQForum Ver 20.06
Log In or Join  
Active Topics
Local Time 15:26 29 Mar 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Small options and setup pgm

     Page 3 of 3    
Author Message
KeepIS

Guru

Joined: 13/10/2014
Location: Australia
Posts: 1336
Posted: 11:59pm 15 Aug 2019
Copy link to clipboard 
Print this post

Fixed a programming language problem with COM Ports.

I remembered from years ago that standard COM interface did not correctly indicate the port status, you can unplug a certain port and the port will still be returned as connected by the programming interface function, and it's still the same.  

I quickly rewrote the code for port detection and bypassed the inbuilt function. The detection now works correctly, but just not as fast, so a port connect / disconnect will take a second or so to shown up in the Port select window.

I also included two default List files for someone trying the program for the first time, DISABLE.TXT and USER.TXT. If you already have these files with these names in the same directory as MM_Options then make sure to remove these from the ZIP first.
It's all too hard.
Mike.
 
     Page 3 of 3    
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024