Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
|
Forum Index : Microcontroller and PC projects : Postable CMM2
Author | Message | ||||
LeoNicolas Guru Joined: 07/10/2020 Location: CanadaPosts: 433 |
Is it a portable CMM2? Yes, it is I put my CMM2 inside a box with a VGA HDMI converter and an USB Hub and I fixed it behind a portable 15" monitor. Now I only have to connect 2 cables to play with my CMM2. The keyboard and the USB power cable. The next step is to replace the duct tape for a better solution. Maybe something 3D printed. Edited 2021-01-25 14:01 by LeoNicolas |
||||
AussieWombat Newbie Joined: 04/05/2018 Location: AustraliaPosts: 21 |
Nice, I got to get me a CMM2, to go with all my others... Aussiewombat |
||||
lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 2989 |
Nice, indeed. What's your monitor? PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
LeoNicolas Guru Joined: 07/10/2020 Location: CanadaPosts: 433 |
It's a ViewSonic 15.6 inch portable monitor model VG1655 The USB hub is being used for distribute power to the monitor, CMM2 and the VGA to HDMI adapter. It should be a good USB hub to support all devices power consumption. I'm using a Unitek 4-Ports USB 3.0 model Y-3089A. The VGA to HDMI adapter is a Cable Matters VGA to HDMI model 103070-black |
||||
HellbentHorse Regular Member Joined: 08/07/2020 Location: AustraliaPosts: 55 |
Nice one. I've been toying with the idea of getting a vga to Lvds adapter and seeing if I can make a laptop style cmm2. |
||||
Print this page |