 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Armmite F4 FruitOfTheShed Hardware page
| Author | Message | ||||
| lizby Guru  Joined: 17/05/2016 Location: United StatesPosts: 3477 |
F4 Hardware here: Fruit Of The Shed Please add whatever you think is appropriate. PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
| Andrew_G Guru Joined: 18/10/2016 Location: AustraliaPosts: 873 |
Lizby, Great effort and very helpful. I am just about to dip my toe (although I will still rely on the good old MM170). Any chance of adding links to known larger/higher resolution touch LCDs? (possibly progressively as people test them?). Cheers, Andrew |
||||
| lizby Guru Joined: 17/05/2016 Location: United StatesPosts: 3477 |
Thanks, and yes, I forgot about that. I have 4", 5", and 7" SSD1963 LCDs working with Peter Mather's 40-pin adapter, and have had a 9" Eastrising one with Grogster's adapter plugged into matherp's. I haven't touched them except for the 4" SSD1963 in over a year. I'll see what I can dig up. The SSD1963s seem to be on the pricy side. That's why I'm looking forward to the OTM8009A which disco4now got working, which is supported by the most recent release. EDIT: FOTS updated now. I could not find the 9" Eastrising LCD in stock. ~ Edited 2021-03-02 08:54 by lizby PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
