Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 11:39 21 Nov 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Displays

Author Message
VK2AHB
Regular Member

Joined: 28/07/2022
Location: Australia
Posts: 51
Posted: 06:20am 13 Aug 2022
Copy link to clipboard 
Print this post

I have a collection of TFT and LCD displays, including a touch screen for the Raspi3B.
The TFTs range from 2' up to 2.8" which I used with the Arduino.
THe LCDs are 2x16 or 4x20 with I2C interface.
Question:
Where can I find examples to use some/all of these?
Can the pico drive the 3B display?

Paul VK2AHB
 
VK2AHB
Regular Member

Joined: 28/07/2022
Location: Australia
Posts: 51
Posted: 06:54am 13 Aug 2022
Copy link to clipboard 
Print this post









 
TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6363
Posted: 07:26am 13 Aug 2022
Copy link to clipboard 
Print this post

The picomite manual lists the currently supported display types.
Your first task is to work out what chipset is used on each of your displays.

Jim
VK7JH
MMedit
 
JohnS
Guru

Joined: 18/11/2011
Location: United Kingdom
Posts: 4147
Posted: 08:29am 13 Aug 2022
Copy link to clipboard 
Print this post

As you have used them with Arduino you can probably find what they are using it.

John
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025