 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Draft PicoMite 6.00.01 User Manual
  Page 13 of 13 |
|||||
| Author | Message | ||||
| Andrew_G Guru  Joined: 18/10/2016 Location: AustraliaPosts: 866 |
Geoff et al, NOT a high priority but I've just spent a 'while' searching for the 'PAGE' command in the manuals (I knew it was there). Is there some way to omit the Page No. from searches or can the word 'Page' not be used at all? Cheers, Andrew |
||||
electricat Senior Member  Joined: 30/11/2020 Location: LithuaniaPosts: 279 |
 Whats Your opinion? While reading manual I just wondered, would it be usefull to add additional Note about MODE 1 and COLOUR fore [, back] or COLOR fore [, back] ? Something like this, but in proper english  "If default TILE HEIGHT 12 is left unchanged and FONT 1 or 3 is used in PICOMITE VGA/HDMI, then user can use COLOR command for color printing using PRINT command with no need to use TILEs." Print @(x,y) with FONT 1 or 3 and carefully calculated coordinates also prints in color. But I do not know how to formulate this in english properly It`s up to You decide if it has some rational value or not  But i did not noticed any mention about this relationship in current manual. My MMBasic 'sand box' |
||||
| electricat Senior Member Joined: 30/11/2020 Location: LithuaniaPosts: 279 |
@Geoffg, Peter Pg. 164 I used GETSCANLINE in USB/HDMI/2350 to display sprite movement nicely. Both OPTION RESOLUTION 800 and 640 ; MODE 1,2 & 3 So, manual might need some update? Edited 2025-04-14 05:50 by electricat My MMBasic 'sand box' |
||||
| Page 13 of 13 |
|||||
 Print this page |
