TheBackShed.com

Forum Index : Microcontroller and PC projects : Upgrading FDD on a DOS system

Author

Message

PhenixRising
Guru

Joined: 07/11/2023
Location: United Kingdom
Posts: 1840

Posted: 02:34pm 13 Apr 2026

Copy link to clipboard

Print this post

Wondering if anyone can recommend a product that is known to work.

I tried one of those USB types, some years ago but it was flakey as heck.

bfwolf
Senior Member

Joined: 03/01/2025
Location: Germany
Posts: 233

Posted: 03:57pm 13 Apr 2026

Copy link to clipboard

Print this post

I'm not exactly sure what you mean by "upgrading", but are you familiar with this?:
https://www.gotekemulator.com/Gotek-Floppy-Drive-to-USB-Emulator.html

These are available with modified firmware and pinout to fit many systems. For example, there are also modified firmwares for the Amiga (so that the device can emulate 880kB and 1760kB Amiga drives and floppy disks).

If you search on Google, you might find DIY projects on GitHub. I vaguely remember something about the Pico as well...

Greetings.

Mixtel90

Guru

Joined: 05/10/2019
Location: United Kingdom
Posts: 8763

Posted: 04:29pm 13 Apr 2026

Copy link to clipboard

Print this post

The Gotek is generally considered to be very reliable once it's set up right. Of course, the settings have to be correct for the disk controller in the machine.

Mick

Zilog Inside! nascom.info for Nascom & Gemini
Preliminary MMBasic docs & my PCB designs

Volhout
Guru

Joined: 05/03/2018
Location: Netherlands
Posts: 5856

Posted: 07:06am 14 Apr 2026

Copy link to clipboard

Print this post

Gotek:

Depends on the system. I tried a Gotek in a HP54622D scope, and that was not succesfull, since it could not save screenshots as BMP, only as TIF.
And they did not save as a file on the USB, but packed inside an .img file.

At that time Windows could not open the .img (a floppy image). Linux could. But it was so clumbersome that I purchased a second hand floppy drive, and a USB floppy disk to attach to the PC.

Volhout

P.S. and I almost fried the scope since there was 12V on the 26 pin cable from the scope. And 5V logic does not like 12V.

PicomiteVGA PETSCII ROBOTS

bfwolf
Senior Member

Joined: 03/01/2025
Location: Germany
Posts: 233

Posted: 09:34am 14 Apr 2026

Copy link to clipboard

Print this post

Volhout said Gotek:

Depends on the system. I tried a Gotek in a HP54622D scope, and that was not succesfull, since it could not save screenshots as BMP, only as TIF.
And they did not save as a file on the USB, but packed inside an .img file.

At that time Windows could not open the .img (a floppy image). Linux could. But it was so clumbersome that I purchased a second hand floppy drive, and a USB floppy disk to attach to the PC.

Volhout

Yes, the Gotek only stores sector data (decoded MFM bitstreams) in image files tailored to the specific system. It knows nothing about the actual file system – that would be asking too much, I think. But reading these images on PCs shouldn't be a problem anymore – 7-Zip, for example, can directly process DOS FAT disk images, and there are plenty of tools for Amiga ADF files. I think even CP/M formats shouldn't be an issue anymore?

Volhout said P.S. and I almost fried the scope since there was 12V on the 26 pin cable from the scope. And 5V logic does not like 12V.

Yes, you should definitely check the pinouts carefully beforehand to make sure they match. Something can easily go up in flames if something is completely incompatible.

There were countless variations of floppy drives. The original Shugart bus with DS via jumpers, IBM PC drives (with a modified drive select implemented via a cable with reversed DS signals), and special versions. That's probably why Gotek offers special versions, for example, for Yamaha keyboards.

Bfwolf

Print this page

To reply to this topic, you need to log in.