 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Sound for Maximite
| Author | Message | ||||
| begoon Newbie  Joined: 15/08/2012 Location: United KingdomPosts: 3 |
Hi, Could you please recommend a speaker or buzzer I could buy to connect to Maximite for sound? I know people used difference ones ripped out from laptops, headphones etc. Does anybody know something I could buy? a part number, for example. Thanks Alexander |
||||
bigmik Guru  Joined: 20/06/2011 Location: AustraliaPosts: 2870 |
Any standard Amplified PC speaker should work, however many these days are USB powered so you will need to either use a USB port or one of those cheap USB `wall warts' to power them.. They should cost around the $15 mark a set (240V jobbies) or $10 (USB powered Jobbies) regards, Mick Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<< |
||||
| begoon Newbie Joined: 15/08/2012 Location: United KingdomPosts: 3 |
Sorry, I put the question wrong way. I'm up a micro speaker with I can mount inside the Maximite case and connect to the audio output directly. I hoped that somebody has already found a good high enough input impedance speaker or buzzer which can be connected directly, without a transistor or something, and also providing a good enough quality sound. |
||||
| ajkw Senior Member  Joined: 29/06/2011 Location: AustraliaPosts: 290 |
Alexander, Try audio transducer AB3440 from Jaycar. There are some pictures of mine fitted in this thread http://www.thebackshed.com/forum/forum_posts.asp?TID=4552&KW =AB3440&PN=0&TPN=1 There is also some info in regards connecting it further in that thread. Cheers, Anthony. |
||||
 Print this page |
