Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 10:22 14 Jul 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Update to Beginning Maximite

Author Message
CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1427
Posted: 11:11am 05 Nov 2012
Copy link to clipboard 
Print this post

New version of Beginning Maximite that covers 4.0 and features for CGCOLORMAX1 is now available for download.

http://www.circuitgizmos.com/files/begmax.pdf
Micromites and Maximites! - Beginning Maximite
 
CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1427
Posted: 12:07pm 19 Nov 2012
Copy link to clipboard 
Print this post

Updated to 1.0 finally. This applies to the CGMMSTICK1 and CGCOLORMAX1 but also applies to the Original Maximite and the Colour Maximite.

Please let me know if there are errors. I'm also open to suggestions. I hope that this becomes a go-to document for anyone interested in the Maximites.

Micromites and Maximites! - Beginning Maximite
 
bigmik

Guru

Joined: 20/06/2011
Location: Australia
Posts: 2949
Posted: 01:56pm 19 Nov 2012
Copy link to clipboard 
Print this post

  CircuitGizmos said   Updated to 1.0 finally. This applies to the CGMMSTICK1 and CGCOLORMAX1 but also applies to the Original Maximite and the Colour Maximite.

Please let me know if there are errors. I'm also open to suggestions. I hope that this becomes a go-to document for anyone interested in the Maximites.



One small one so far

Under INPUT$ you have a missing $ sign..

INPUT$ (from file)
INPUT( nbr, [#]fnbr )

Should be

INPUT$ (from file)
INPUT$( nbr, [#]fnbr )

Regards,

Mick

PS. Good Job Rob
Mick's uMite Stuff can be found >>> HERE (Kindly hosted by Dontronics) <<<
 
CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1427
Posted: 02:31pm 19 Nov 2012
Copy link to clipboard 
Print this post

Thanks, Mick. I fixed the working copy that I have. I also fixed the INPUT # to have text rather than "see above".

Micromites and Maximites! - Beginning Maximite
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025