TheBackShed.com

Forum Index : Microcontroller and PC projects : ColorMax MMIDE

Author

Message

hitsware
Guru

Joined: 23/11/2012
Location: United States
Posts: 535

Posted: 07:38pm 09 Dec 2012

Copy link to clipboard

Print this post

My ColorMax is working great stand alone,
but since I have (room for), and only one
monitor, I'd like to run it from my PC
via USB. The MMIDE utility shows a blank
screen when I select the ColorMax. I think
(as usual) I'm missing something simple.
TIA for some direction ........ :)

paceman
Guru

Joined: 07/10/2011
Location: Australia
Posts: 1328

Posted: 12:54am 10 Dec 2012

Copy link to clipboard

Print this post

hitsware said The MMIDE utility shows a blank
screen when I select the ColorMax. I think
(as usual) I'm missing something simple.
TIA for some direction ........ :)

Hi hitsware,

Have you selected the correct Port from the drop-down box at the top of the MMIDE screen. This must be done each time you start MMIDE before you can talk to it. It normally starts with a blank screen after that, but if you hit return it should display the prompt.

Also MMIDE currently has a bug in the XMODEM transfer protocol so it may be easier to download TerraTerm (a free USB terminal emulator) and use that as suggested on Geoff Graham's website. If you do use TerraTerm read Geoff's comments on it's use before you start. There are a couple of settings that must be set to use it with the Maximite family.

Greg

CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1421

Posted: 05:23am 10 Dec 2012

Copy link to clipboard

Print this post

There is certainly a bug in MMIDE3 in XMODEM. It has been elusive. No code difference from earlier MMIDE and yet the problem is still there. So no transfer to/from Maximite A: and B: drives.

But the rest of MMIDE is usable. The button that transfers a file directly to the Maximite RAM works.Edited by CircuitGizmos 2012-12-11

Micromites and Maximites! - Beginning Maximite

hitsware
Guru

Joined: 23/11/2012
Location: United States
Posts: 535

Posted: 07:00am 10 Dec 2012

Copy link to clipboard

Print this post

Thanks :)
So if I get TeraTerm I use it instead of MMIDE ?
Or someways along with it ?

CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1421

Posted: 07:08am 10 Dec 2012

Copy link to clipboard

Print this post

TT would let you do XMODEM if you needed to do that. Transfer a file to/from the Maximite's A:/B: drives. Also good for the VT100 that the Maximite uses in edit mode. Two places that are lacking in MMIDE3.

Micromites and Maximites! - Beginning Maximite

hitsware
Guru

Joined: 23/11/2012
Location: United States
Posts: 535

Posted: 10:55am 10 Dec 2012

Copy link to clipboard

Print this post

I think I am missing the driver that makes the usb into a com port.
Where do I find that ?
Sorry for the newbieness :)

CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1421

Posted: 10:57am 10 Dec 2012

Copy link to clipboard

Print this post

hitsware said I think I am missing the driver that makes the usb into a com port.
Where do I find that ?
Sorry for the newbieness :)

http://geoffg.net/Downloads/Maximite/Silicon_Chip_USB_Serial _Port_Driver.zip

Micromites and Maximites! - Beginning Maximite

hitsware
Guru

Joined: 23/11/2012
Location: United States
Posts: 535

Posted: 01:12pm 10 Dec 2012

Copy link to clipboard

Print this post

Thanks ! Got it !
Easy with XP ...... A little awkward with Win8
(the install only...works fine)
For my purposes (audio out) a version without
video, SD, 12V in, etc. would be cool. (in this mode)
Just the usb pwr and link and a bunch of pwm
(both frequency and duty cycle programmable)
channels ........ Beats the hell out of a Stamp !

donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1310

Posted: 01:45pm 10 Dec 2012

Copy link to clipboard

Print this post

hitsware said Beats the hell out of a Stamp !

Can be a little cheaper than a stamp module also:
http://tinyurl.com/2x45ce

http://www.dontronics-shop.com/maximite-15pin-dm-mini.html

Don...Edited by donmck 2012-12-12

https://www.32v8.com/1

hitsware
Guru

Joined: 23/11/2012
Location: United States
Posts: 535

Posted: 01:52pm 12 Dec 2012

Copy link to clipboard

Print this post

CircuitGizmos said TT would let you do XMODEM if you needed to do that. Transfer a file to/from the Maximite's A:/B: drives. Also good for the VT100 that the Maximite uses in edit mode. Two places that are lacking in MMIDE3.

Using your MMIDE :

If I write a routine it runs fine.
If I try to edit it, it seems to work,
but running doesn't reflect the changes
and listing doesn't show the changes.
This is with both Win8 and XP and a ColorMax
and a DuinoMite.
Everything works fine in standalone (no MMIDE)
mode......
HyperRegards,
Michael Miller

CircuitGizmos

Guru

Joined: 08/09/2011
Location: United States
Posts: 1421

Posted: 05:21am 13 Dec 2012

Copy link to clipboard

Print this post

"If I try to edit it, it seems to work,
but running doesn't reflect the changes
and listing doesn't show the changes. "

MMIDE doesn't support the VT100 escape sequences needed for editing.

Micromites and Maximites! - Beginning Maximite

hitsware
Guru

Joined: 23/11/2012
Location: United States
Posts: 535

Posted: 07:16am 13 Dec 2012

Copy link to clipboard

Print this post

> MMIDE doesn't support the VT100 escape
> sequences needed for editing.

Geez ....... I thought that was the whole idea.
Guess I'll have to invest in a small monitor
and keyboard.

TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 5912

Posted: 10:18am 13 Dec 2012

Copy link to clipboard

Print this post

You could try MM Edit...
http://www.c-com.com.au/MMedit.htm

Jim

VK7JH
MMedit MMBasic Help

hitsware
Guru

Joined: 23/11/2012
Location: United States
Posts: 535

Posted: 11:00am 13 Dec 2012

Copy link to clipboard

Print this post

Thanks !
I got the Tera Term going O.K.
I'd forgotten there were other terminal programs.

Print this page

To reply to this topic, you need to log in.