 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Can’t Connect with MMEDIT
| Author | Message | ||||
2001cpx Regular Member  Joined: 03/10/2013 Location: CanadaPosts: 59 |
MMedit v 3.4.0 Very Strange,Worked With MMedit last times with no problem. now each time i do Chat to Maximite An Error 0 Messagenotunderstood and Error 0 Bad file handle ;#recRaw Can Connect to explore SDcard ok tried to re install,changed USB Outlet,checked under files COMPORT ok any help appreciated thanks in advance "Color Maximite,(Duinomite-Mega,Mini),CGmmStick,GCmicroboard2b,Micromite + explore 64,100,LCD backpack,Lcd Backpack V2,TFT Backpack,Micromite Extreme,Armmite L,F,H,CMM2" |
||||
| 2001cpx Regular Member Joined: 03/10/2013 Location: CanadaPosts: 59 |
Tryed on Another computer and everything work fine - removed all Maximite related usb driver (With USBDVIEW) - re-installed new driver(found on Geoff Project pages) - re-installed MMedit Work With MM Master File,but not With MMchat very strange,surely i have installed one software and modified some important files - tried Cleanup Program CCleaner,Tuneup -Scanned With Malwarebyte PRO -Scanned with Zonealarm i will continue to found the problem,any help will be greatly appreciated "Color Maximite,(Duinomite-Mega,Mini),CGmmStick,GCmicroboard2b,Micromite + explore 64,100,LCD backpack,Lcd Backpack V2,TFT Backpack,Micromite Extreme,Armmite L,F,H,CMM2" |
||||
TassyJim Guru  Joined: 07/08/2011 Location: AustraliaPosts: 5923 |
Strange, #recRaw refers to a debug file that only comes into play while doing XMODEM file transfers. I should have disabled it fully on the release code. I expect that there is something in your configuration files that MMEdit is not happy about. You could try uninstalling MMEdit and then deleting the data folder. It's location can be found from Help/About. This will then allow a clean installation of MMEdit. Before that, you could try replacing the file MMEdit.tkn in the program folder with the one in the attached ZIP file. I have (hopefully) disabled the culprit fully. 2013-12-28_091048_MMedit.zip I have been working on the all new version of MMedit and I am happy with the progress. There are plenty of differences between the Windows and Linux versions for me to discover. The one big section of code left to tackle is the VT terminal. Jim VK7JH MMedit MMBasic Help |
||||
Grogster Admin Group  Joined: 31/12/2012 Location: New ZealandPosts: 9085 |
I have been happily using MMEdit2 version 0.9(pre-release alpha) that you put up here a while ago, just for the colour printing and it is fantastic.  I still use the stable v3 for editing etc, though.
...but I digress from the topic of this thread... Smoke makes things work. When the smoke gets out, it stops! |
||||
| 2001cpx Regular Member Joined: 03/10/2013 Location: CanadaPosts: 59 |
RESOLVED!!!! 
Thank you Very Much!! Yes that's resolved my problem,only add/delete program will not suffice, i need to remove Manually in Documents and Setting and etc... I think if you never replyed, I would never find! thanks Again.and i Like MMedit!!!! "Color Maximite,(Duinomite-Mega,Mini),CGmmStick,GCmicroboard2b,Micromite + explore 64,100,LCD backpack,Lcd Backpack V2,TFT Backpack,Micromite Extreme,Armmite L,F,H,CMM2" |
||||
| Grogster Admin Group Joined: 31/12/2012 Location: New ZealandPosts: 9085 |
A happy ending - I like those.  Smoke makes things work. When the smoke gets out, it stops! |
||||
 Print this page |
