TheBackShed.com

Forum Index : Microcontroller and PC projects : RELIABLE USB-Serial adaptor lead...

Author

Message

Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 9488

Posted: 08:31pm 21 Jul 2014

Copy link to clipboard

Print this post

Hi folks.

I am looking for a reliable(not cheap Chinese clone) brand-name USB to serial lead.

Jaycar NZ sell one here, which would appear to be a genuine Prolific one, but it is a little more costly then I was hoping for.

What do other members here recommend?

Please note that it needs to be an encapsulated lead type adaptor, not a PCB that I then have to wire up - I want to be able to plug one end into the laptop, the other into the 232 device without having to fuff around.

Smoke makes things work. When the smoke gets out, it stops!

aargee
Senior Member

Joined: 21/08/2008
Location: Australia
Posts: 255

Posted: 10:23pm 21 Jul 2014

Copy link to clipboard

Print this post

I've got a number of A-Ten ones here, if you were on this side of the ditch I'd give you one for free.
They seem to work quite well.

For crying out loud, all I wanted to do was flash this blasted LED.

centrex

Guru

Joined: 13/11/2011
Location: Australia
Posts: 320

Posted: 10:29pm 21 Jul 2014

Copy link to clipboard

Print this post

Have a look at the Dontronics web site he has 3v & 5v versions, not particularly cheap but they work.
Cliff

Cliff

paceman
Guru

Joined: 07/10/2011
Location: Australia
Posts: 1329

Posted: 02:02am 22 Jul 2014

Copy link to clipboard

Print this post

I've had one of the DB9 connector UC232A's from A-ten (as per aargee's post) for a couple of years now and it's worked fine. Mine's used on a Win XP USB port and RFID board with a 3232 chip interface.

Greg

donmck

Guru

Joined: 09/06/2011
Location: Australia
Posts: 1313

Posted: 12:01pm 22 Jul 2014

Copy link to clipboard

Print this post

centrex said Have a look at the Dontronics web site he has 3v & 5v versions, not particularly cheap but they work.
Cliff

Thanks Cliff,

I have them direct from Easysync, yes not cheap: (guaranteed FTDI manufactured)
http://www.dontronics-shop.com/easysync-premium-gold-usb-rs2 32-adapter-cable-10cm-cable.html

Or a cheaper Chinese manufactured model, however guaranteed to have FTDI chipset, and guaranteed to work on the latest FTDI drivers:
http://www.dontronics-shop.com/usb-rs232-chinese-adapter-cab le.-1.8-meter-cable-usb-rs232-chn.html

All prices include Australian postage. I'll even post to NZ free on these.

Cheers Don...

https://www.dontronics.com

TassyJim

Guru

Joined: 07/08/2011
Location: Australia
Posts: 6220

Posted: 12:02pm 22 Jul 2014

Copy link to clipboard

Print this post

I agree with the A-Ten units.
They were one of the few that I was willing to sell (but that was a long time ago now so things might have changed).

Jim

VK7JH
MMedit

palcal

Guru

Joined: 12/10/2011
Location: Australia
Posts: 1965

Posted: 09:12pm 22 Jul 2014

Copy link to clipboard

Print this post

Have a look at this one, I have dealt with WES for many years and I find their products very reliable.USB to Serial Cable
Paul

"It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all"

Print this page

To reply to this topic, you need to log in.