 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : PIC32MZ2048ECM064-I/MR
| Author | Message | ||||
G8JCF Guru  Joined: 15/05/2014 Location: United KingdomPosts: 676 |
Hi The PIC32MZ2048ECM064-I/MR is supposed to be available from Microchip direct for GBP 6.98 in 1-25 quantities with shipping estimated for 17-Nov-2014. Some questions 1) Is this date believable ? 2) Will the existing versions of MMBasic run on the PIC32MZ chips, or will a new version have to be released ? I appreciate that we're still only just moving to 170F's, but I happened across the PIC32MZ's on Microchip Direct, and the prices seemed very reasonable indeed for all that extra power, so I just had to ask the group for their opinion/thoughts. Many thanks Peter The only Konstant is Change |
||||
| akashh Senior Member  Joined: 19/01/2014 Location: IndiaPosts: 115 |
They have been available on and off for a while now on digikey and element14. I even had some ordered but they could not deliver due to import restrictions, as far as I know that is due to the cryptography engine built in. So I would say it is realistic. I have been dying to get my Wattmon on a faster bigger better platform but it looks like it isn't going to happen anytime soon. Edit: could not deliver to india, I am sure Australia will work fine |
||||
Geoffg Guru Joined: 06/06/2011 Location: AustraliaPosts: 3165 |
The PIC32MZ is not easy to work with, see my comments in http://www.thebackshed.com/forum/forum_posts.asp?TID=6555 BTW, it is still a work in progress... Geoff Geoff Graham - http://geoffg.net |
||||
| G8JCF Guru Joined: 15/05/2014 Location: United KingdomPosts: 676 |
Thank you Geoff for the reply. I've scanned that thread and understand the obstacles. I shall be patient ! In the meantime there's mountains to be getting along with 
Take care Peter The only Konstant is Change |
||||
 Print this page |
