Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
|
Forum Index : Microcontroller and PC projects : small (amusing) bug
Author | Message | ||||
robert.rozee Guru Joined: 31/12/2012 Location: New ZealandPosts: 2291 |
has anyone noticed this before: > 9 edit
Micromite MMBasic Ver 4.6 Beta 1 Copyright 2011-2014 Geoff Graham > at the command prompt, typing a "line number" followed by certain commands causes a reboot. i've tried '9 edit' and '9 cpu'. '9 memory' doesn't reboot and does the same as 'memory'. tested with 4.5C and 4.6 Beta 1 rob :-) |
||||
hitsware Guru Joined: 23/11/2012 Location: United StatesPosts: 535 |
Is it a reboot or the same as VERSION ? |
||||
G8JCF Guru Joined: 15/05/2014 Location: United KingdomPosts: 676 |
@RR Thank you ! I've been looking for a way of causing a MMBasic reset in software and looks like you have found the way, although not quite as good as the h/w method. @Geoff could we please have an official way of causing a complete reset of MMBasic via the CLI, ie erase program, and all OPTION settings, eg CTRL+C, RESET CRLF ? I'm asking for this capability because as part of my PIC32 programmer, I need to reset the uMite. BTW, this is a very, very, very low priority request, there are far more important things to get done first. Many thanks Peter The only Konstant is Change |
||||
robert.rozee Guru Joined: 31/12/2012 Location: New ZealandPosts: 2291 |
the command "WATCHDOG 5" in your code (or at the command line) nicely does a reset, i've been using it to check that the startup message displays correctly with newly created micromites for quite a while. rob :-) |
||||
G8JCF Guru Joined: 15/05/2014 Location: United KingdomPosts: 676 |
@rr Thanks for that tip, I'll file it away for future use. Cheers Peter The only Konstant is Change |
||||
f1fco Senior Member Joined: 18/03/2012 Location: FrancePosts: 154 |
hello to all, is it a 4.6 version available ? where to download it ? thank you for answer Pierre, from France 73s de F1FCO |
||||
Geoffg Guru Joined: 06/06/2011 Location: AustraliaPosts: 3165 |
Give me a couple of days. I plan to release a beta version of it soon. EDIT and it will also fix this bug (a good find BTW Rob). Geoff Graham - http://geoffg.net |
||||
twofingers Guru Joined: 02/06/2014 Location: GermanyPosts: 1135 |
@Pierre plz take a look at this thread. Michael |
||||
Print this page |