 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : MM+ Execution Speed
| Author | Message | ||||
atmega8 Guru  Joined: 19/11/2013 Location: GermanyPosts: 712 |
Hi, in Mmbasic/ Micromite we had some "Numbers" about Execution Speed of Basic Lines. I think it was about 15000 - 30000 Lines/Second depending on the CPU Speed. Any Idea how fast the MM+ will be with 120 MHz CPU Speed? Do we have Benchmarks? THX, Dietmar |
||||
Grogster Admin Group  Joined: 31/12/2012 Location: New ZealandPosts: 9082 |
No benchmarks yet, but if you can show me some code to run for a benchmark, I can run them on the MM+ I have here, and post the results. I would expect the results to be quite good compared to the 40MHz MM2. I can only test at 100MHz for the moment - waiting for the 120MHz spec chips to arrive before I can run 120MHz. Geoff's video was done at 100MHz so I understand - he will correct me if I am wrong about that. Smoke makes things work. When the smoke gets out, it stops! |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 8605 |
See this thread for MM+ Speeds I get exactly the same results on the recently released firmware the same as Geoff posted previously at 120MHz |
||||
| Grogster Admin Group Joined: 31/12/2012 Location: New ZealandPosts: 9082 |
Thanks matherp - not sure how I missed that one......  Smoke makes things work. When the smoke gets out, it stops! |
||||
Geoffg Guru Joined: 06/06/2011 Location: AustraliaPosts: 3167 |
I use an unofficial and simple benchmark which gives: - Micromite MkII at 48MHz is 27716 lines/sec - Micromite Plus at 120MHz is 49019 lines/sec Geoff Graham - http://geoffg.net |
||||
 Print this page |
