Home
JAQForum Ver 20.06
Log In or Join  
Active Topics
Local Time 20:39 08 May 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : GUI REDRAW ALL

Author Message
KeepIS

Guru

Joined: 13/10/2014
Location: Australia
Posts: 1387
Posted: 05:04pm 06 Aug 2017
Copy link to clipboard 
Print this post

This doesn't work for me in "plus MMBasic Ver 5.04.05" on an E100. I'm not concerned as I just list the controls instead.

GUI REDRAW ALL
Error: Invalid Font number #13

GUI REDRAW XX or GUI REDRAW X1,X2,X3 is OK.

Apology if it's been discussed before.




It's all too hard.
Mike.
 
Grogster

Admin Group

Joined: 31/12/2012
Location: New Zealand
Posts: 9070
Posted: 05:46pm 06 Aug 2017
Copy link to clipboard 
Print this post

Confirmed.





Interesting. I am getting a font #11 error, but the same kind of error, and I don't have a font #11 installed. This is on an E64 module with 7" LCD.
Smoke makes things work. When the smoke gets out, it stops!
 
KeepIS

Guru

Joined: 13/10/2014
Location: Australia
Posts: 1387
Posted: 05:52pm 06 Aug 2017
Copy link to clipboard 
Print this post

Yes I'm the same - different font error between local KB and USB console, so obviously that is not the actual problem.

Glad It's not just me again
It's all too hard.
Mike.
 
Geoffg

Guru

Joined: 06/06/2011
Location: Australia
Posts: 3165
Posted: 07:36pm 06 Aug 2017
Copy link to clipboard 
Print this post

Thanks, I will chase it down.

Geoff
Geoff Graham - http://geoffg.net
 
GoodToGo!

Senior Member

Joined: 23/04/2017
Location: Australia
Posts: 188
Posted: 03:04pm 07 Aug 2017
Copy link to clipboard 
Print this post

I'm wondering if it's related to the GUI page 3 issue I'm having? Seethis topic .
I worked around it by using page 5 instead of 3. No more issue, but not a fix either.

Cheers,

GTG!
...... Don't worry mate, it'll be GoodToGo!
 
KeepIS

Guru

Joined: 13/10/2014
Location: Australia
Posts: 1387
Posted: 12:21am 08 Aug 2017
Copy link to clipboard 
Print this post

Page 3 in latest version is fine for me, I noticed you had previous build in the thread -- However:

There appears to be a problem with the TEXT procedure.

The justification appears to be back to front, or else I'm just having another Seniors moment.



It's all too hard.
Mike.
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024