 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Micromite Extreme 144 pinout missing pins
| Author | Message | ||||
HardingJohn Regular Member  Joined: 28/07/2017 Location: AustraliaPosts: 78 |
I was wiring up a SSD1963 7inch LCD Panel to a PIC32MZ 144 pin chip and I could not find the Reset, WR or RD pins listed in the latest Micromite Extreme Manual. They are shown in the 100 pin list, but not the 144 pin. Also where are the VGA-SS pins for Red, Blue and Green? There are three pins all shown as VGA-CLK, I presume these are the three colours for VGA CLK which are left unconnected anyway. Has anyone used the 144 pin chip yet? Please help. Awesome work by the way, greatly appreciated. John Just know enough to get me in trouble, but not quite enough to get me out. |
||||
palcal Guru  Joined: 12/10/2011 Location: AustraliaPosts: 2006 |
Hi John, I have one running but to save tracing out the pins they are on the schematic see this thread . They are; WR = 141 RD = 142 Reset = 139 VGA green = 47 blue = 48 red = 49 Paul. "It is better to be ignorant and ask a stupid question than to be plain Stupid and not ask at all" |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 10565 |
Will include in next version of the manual 139 DIGITAL_IN DIGITAL_OUT SSD1963-RESET 140 DIGITAL_IN DIGITAL_OUT SSD1963-RS 141 DIGITAL_IN DIGITAL_OUT SSD1963-WR VGA-SS lines are labelled VGA-HSYNC in the manual Lines labelled VGA-CLK must be left unconnected if VGA is used |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
