Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 17:32 03 May 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : PCB Manufacturing : Diptrace pattern

Author Message
lew247

Guru

Joined: 23/12/2015
Location: United Kingdom
Posts: 1702
Posted: 07:26am 09 Aug 2016
Copy link to clipboard 
Print this post

Does anyone have a mini USB B pattern for Diptrace please?
Ideally one where the actual part number is available as well
I've found out through experience, not all footprints are the same, you have to have the footprint for the actual socket you want to use

This way I can order the correct usb socket to match the pattern
 
MicroBlocks

Guru

Joined: 12/05/2012
Location: Thailand
Posts: 2209
Posted: 09:58pm 09 Aug 2016
Copy link to clipboard 
Print this post

Here is a Component/Pattern and 3d model.
2016-08-10_075644_Lew.zip
Watch out! The 3d model is very, very close but the two pins on the front which connect the metal case to the pcb are a bit offset to the back.
The pattern is correct and i have test fitted it.
The pattern also has all the dimensions so you can check it with the part you are going to order.

Microblocks. Build with logic.
 
lew247

Guru

Joined: 23/12/2015
Location: United Kingdom
Posts: 1702
Posted: 12:49am 10 Aug 2016
Copy link to clipboard 
Print this post

Thanks Jean
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025