Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 14:38 06 May 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Windmills : Blade angles

     Page 3 of 3    
Author Message
Midwoud1
Newbie

Joined: 25/12/2012
Location: Netherlands
Posts: 23
Posted: 08:13am 27 Dec 2012
Copy link to clipboard 
Print this post

Hi

@ Downwind. The bevelgears are of the shelf here.
Possible use the planetary gearwheels from a car differential.

@ Fillm. The m-controller is working without problems,like in our washing-and coffeemachines.
Option can be ,moving the tail in 90 degrees by an actuator.
I'm still reading your blog.

@ Rastus. Low maintenance . I did nothing, just a few drops of oil on the acuator push-pull rod.
The whole process of construction is on ACTIVE PITCHCONTROLon Fieldlines as Fillm mentioned.

Rgds -Frans-
 
Midwoud1
Newbie

Joined: 25/12/2012
Location: Netherlands
Posts: 23
Posted: 08:24am 27 Dec 2012
Copy link to clipboard 
Print this post




http://www.youtube.com/watch?v=MWz87YH9yz4

Active Pitchcontrol made in Istanbul Turkey
 
Midwoud1
Newbie

Joined: 25/12/2012
Location: Netherlands
Posts: 23
Posted: 09:33am 05 Feb 2013
Copy link to clipboard 
Print this post

Windgenerator in highwind 12 - 15 m/sec.
Max. Rpm:350
750 Watt
Rgds. Frans
http://www.youtube.com/watch?v=F9AN1TdJz1A
 
jorn
Newbie

Joined: 30/12/2012
Location: Netherlands
Posts: 22
Posted: 08:13pm 01 Jun 2013
Copy link to clipboard 
Print this post

Hey Frans,

Curious to your new developments and also those of Fillm

Greetings Jorn
 
     Page 3 of 3    
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025