 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Windmills : Windmill project (Innotech)
| Author | Message | ||||
| Marijn_Innotech Newbie  Joined: 31/01/2012 Location: NetherlandsPosts: 1 |
We just started this windmill project but first let me introduces myself. My name is Marijn van Antwerpen, 20 years old and I’m in my training period from school and I’m working at Innotech Europe BV in the Netherlands. My training period started the 30th of January 2012, but for the preparation we already spend 2 months. In those 2 months we spend a lot of time on how we want to make the windmill. We decided to make a 4500 mm diameter windmill with pitch control. And for the generator we assume the Hugh Piggott design. We also started with the 3D sketches in solidworks. You can see the pictures below. During the project I will keep you all up to date. Marijn van Antwerpen www.innotecheurope.nl marijnvanantwerpen@gmail.com 
|
||||
Gizmo Admin Group  Joined: 05/06/2004 Location: AustraliaPosts: 5111 |
Hi Marijn Welcome to the forum. Thats a big project you are taking on there. Keep us posted and feel free to ask any questions you may have along the way. Glenn The best time to plant a tree was twenty years ago, the second best time is right now. JAQ |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
