 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Windmills : auto jumpbox componet.
| Author | Message | ||||
divemaster1963 Regular Member  Joined: 28/01/2009 Location: United StatesPosts: 46 |
I have a deadd jumpbox that has a charge controller in it. can it be used to control the charging from my mill. it normally has a input of 14-17 volts at 300-900 maps.. it has a auto shutoff at 14'6 volts.and a votl meter with it. 
|
||||
Gizmo Admin Group  Joined: 05/06/2004 Location: AustraliaPosts: 5153 |
Not much good for a windmill I'm afraid. It should, in theory, work for a small solar panel as a trickle charger, but nothing to serious. The 300 to 900mA rating mean its only good for approx 4 to 10 watts. Glenn The best time to plant a tree was twenty years ago, the second best time is right now. JAQ |
||||
| divemaster1963 Regular Member Joined: 28/01/2009 Location: United StatesPosts: 46 |
RATS  I was hoping that someone has looked at these and could give advice on possibly changing some of the electroics out to make it work. these things are all over. people throw them away because they forget to keep them charged.the batteries cost almost double the cost of the whole thing. I had 6 that people thuraway. i used most of them to fix damaged ones that some of our police officers damaged will they were in their trunks. |
||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
