TheBackShed.com

Forum Index : Off topic archive. : Help

Author

Message

VK4AYQ
Guru

Joined: 02/12/2009
Location: Australia
Posts: 2539

Posted: 01:38pm 26 Sep 2011

Copy link to clipboard

Print this post

Hi all

I have melted my LG stator winding on my project and need to order a new set of windings and need a part number of the winding assembly, it came from a LG top loader 7.5 KG washing machine, does any one have a intact one to get a part number off to save me from the parrot like spare parts dealers that can't do anything without a part number.

All the best

Bob

Foolin Around

grub
Senior Member

Joined: 27/11/2007
Location: Australia
Posts: 169

Posted: 09:40pm 26 Sep 2011

Copy link to clipboard

Print this post

Have you tried checking out garbage tips or scrap metal dealers or even appliance repairers? Could pick one up from them.

VK4AYQ
Guru

Joined: 02/12/2009
Location: Australia
Posts: 2539

Posted: 09:52pm 26 Sep 2011

Copy link to clipboard

Print this post

Hi Grub

I have spread the word around to the repair shops but no luck, not many of these machines sold in my area, and a trip to the recycling depot in Brisbane was unproductive, just the cost of petrol to go to Bris a couple of times costs as much as a new motor.

I will keep looking.

All the best

Bob

Foolin Around

grub
Senior Member

Joined: 27/11/2007
Location: Australia
Posts: 169

Posted: 11:56pm 27 Sep 2011

Copy link to clipboard

Print this post

The part number for the stator to suit a LG WT-R801 is 4471FA1994D.
There are other models with the direct drive motor but this is for one of them.

VK4AYQ
Guru

Joined: 02/12/2009
Location: Australia
Posts: 2539

Posted: 12:26am 28 Sep 2011

Copy link to clipboard

Print this post

Hi grub

Thanks for that I will order one from the parts supplier.

Thank You

Bob

Foolin Around

GJK2010

Newbie

Joined: 07/10/2010
Location: United States
Posts: 17

Posted: 07:01pm 28 Sep 2011

Copy link to clipboard

Print this post

Bob,
can you get a part number? or maybe a serial number off the machine it came from?
I have bought from these places and they usually have the parts.
www.applianceparts.com & wwww.appliancepros.com Otherwise if it isnt too hard I would change the generator to a Smartdrive from randy burnmeister (www.randysworkshop.com ) randy's alot cheaper and faster service he's a good fella
Take care
Gary

VK4AYQ
Guru

Joined: 02/12/2009
Location: Australia
Posts: 2539

Posted: 01:46am 29 Sep 2011

Copy link to clipboard

Print this post

Hi gary

Thanks for the suggestions, I do not know the machine model it came from as I bought it on Fleabay and any numbers on the stator are cooked off due to the fire, i want to persist with it due to the fact that I have made a neo rotor that wasn't on it when it got fired up so want to salvage the project as considerable expense went into the neo rotor. Unfortunately freight from the US makes it impossible to buy from there, this morning I got a quote for magnets for another project of $94 dollars and freight at $425 so that's the problem down under.

All the best

Bob

Foolin Around

norcold

Guru

Joined: 06/02/2011
Location: Australia
Posts: 670

Posted: 05:14pm 29 Sep 2011

Copy link to clipboard

Print this post

Bob,
Try Allfixelectrical on ebay, found they give top service. They do not list a LG motor on their store but they may be able to source such.

We come from the land downunder.
Vic

GJK2010

Newbie

Joined: 07/10/2010
Location: United States
Posts: 17

Posted: 05:51pm 29 Sep 2011

Copy link to clipboard

Print this post

Bob,
Hey sorry I didnt look at your location didnt know shipping was that expensive! Boy they're killin a guy on shipping.. otherwise I could look here at my local junk yard see what he has... but than again shipping.....unless theres any other way... I dont know what to say. let me know if theres any way I can assit you.
Take care.
Gary

VK4AYQ
Guru

Joined: 02/12/2009
Location: Australia
Posts: 2539

Posted: 10:11pm 29 Sep 2011

Copy link to clipboard

Print this post

Hi Gary

Distance is a problem and thanks for the Kind thought.

All the best

Bob

Foolin Around

VK4AYQ
Guru

Joined: 02/12/2009
Location: Australia
Posts: 2539

Posted: 10:13pm 29 Sep 2011

Copy link to clipboard

Print this post

Hi Vic

I will give them a try today, some of the other suppliers I contacted haven't even got back to me.

All the best

Bob

Foolin Around

Print this page

To reply to this topic, you need to log in.