 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Electronics : Juntek state of charge Meter Mods
| Author | Message | ||||
| noneyabussiness Guru  Joined: 31/07/2017 Location: AustraliaPosts: 506 |
i have used these devices for years and found some interesting things.... Juntek vac4300 ... PRO: very handy for state of charge, bi-directional current sensing.. seem pretty accurate... CON: the wireless signal is quite dismal, 10-15 meters advertised.. .bout that in real life.. so lets fix that, it uses the standard NRF24L01 modules... sweet order some palna+ versions , like this NRF24L01 palna+ matter of squeezing them in... sorry only took finished pics, but you get the idea.. first pic, installed in the "sender " unit, i have 2, one does wired in shed, other is inside house.    Happily transmits inside about 30-40 metres away, with 2 walls.. happy camper   I think it works !! |
||||
Revlac Guru Joined: 31/12/2016 Location: AustraliaPosts: 961 |
That's certainly good to know that will work.  I bought a few of those Wifi NRF24L01+PA+LNA modules and a bunch of the regulator modules as well, for another project. You receive the data to your phone or something else? Cheers Aaron Off The Grid |
||||
 Print this page |
