TheBackShed.com

Home	JAQForum Ver 20.06
Log In or Join
Active Topics
Local Time 09:49 19 Apr 2024	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : Siglent ISFE Isolated Front End module

Page 2 of 2

Author

Message

phil99

Guru

Joined: 11/02/2018
Location: Australia
Posts: 1769

Posted: 06:29am 30 Dec 2023

Copy link to clipboard

Print this post

1% is quite good. You must be using quality resistors.

To get closer try 8.72k... or is it 8.88k? One or the other should do it ;)
Edited 2023-12-30 16:43 by phil99

gaspo
Regular Member

Joined: 25/06/2018
Location: Australia
Posts: 61

Posted: 07:06am 30 Dec 2023

Copy link to clipboard

Print this post

phil99 said To get closer try 8.72k... or is it 8.88k?

Next time I'll be ordering from LCSC I'll get some more values from E48/E96 range.
It is good enough for now.

pd--
Senior Member

Joined: 11/12/2020
Location: Australia
Posts: 122

Posted: 03:00am 07 Jan 2024

Copy link to clipboard

Print this post

Hi gaspo
i am about to make a couple of probes my self and was wondering on the power consumption.

The documentation seas 50ma witch is probably a bit high for a 9v battery.
Any recommendations on weather i should yous 2 x 18650's or a 9v battery is ok

thanks

gaspo
Regular Member

Joined: 25/06/2018
Location: Australia
Posts: 61

Posted: 06:59am 07 Jan 2024

Copy link to clipboard

Print this post

I recorded a current of approximately 53mA, and with a discharge rate of 50mA, the Duracell 9V battery would only sustain this for approximately 8 hours.
Alternatively, opting for 2x 18650 batteries in series would provide a duration of over 100 hours, or utilizing a 9-12V wall adapter is also a viable option.

Page 2 of 2

Print this page

To reply to this topic, you need to log in.