TheBackShed.com

Forum Index : Electronics : another inverter question

Author

Message

Murphy's friend

Guru

Joined: 04/10/2019
Location: Australia
Posts: 586

Posted: 09:03am 05 Oct 2023

Copy link to clipboard

Print this post

I'm finding it difficult to source suitable thru hole transistors for the totem pole driver, which will fit my PCB hole spacing.

Would these : BD681 & BD682 work? They ate 4A darlington transistors.

Thanks

pd--
Senior Member

Joined: 11/12/2020
Location: Australia
Posts: 122

Posted: 11:24am 05 Oct 2023

Copy link to clipboard

Print this post

Do you mean to replace the 2sc6017 & 2sa2169

Murphy's friend

Guru

Joined: 04/10/2019
Location: Australia
Posts: 586

Posted: 01:25pm 05 Oct 2023

Copy link to clipboard

Print this post

Yes, one of them appears to be no longer stocked at Digikey.

Solar Mike
Guru

Joined: 08/02/2015
Location: New Zealand
Posts: 1126

Posted: 10:21pm 05 Oct 2023

Copy link to clipboard

Print this post

Murphy's friend said I'm finding it difficult to source suitable thru hole transistors for the totem pole driver, which will fit my PCB hole spacing.

Would these : BD681 & BD682 work? They ate 4A darlington transistors.

Thanks

Don't think so, darlington types have a high CE saturation voltage, so will not switch the mosfets very well.

looks like the originals are now obsolete, seems there are some on AliExpress, whether they are originals or clones maybe hard to verify.

There is probably something else around with a similar spec, however it will take a lot of time to look at all the specs and compare. You want approx 10 amps, 50 volts, low CE saturation voltage < 0.6v and switching times around 50 nSec.
Would be easier to just use a single TO220 size mosfet driver chip, hmm pcb re-design.

Edit Look at the MJE200G(NPN), MJE210G(PNP), seem fairly fast switching with low sat voltage.

Cheers
Mike
Edited 2023-10-06 08:36 by Solar Mike

Murphy's friend

Guru

Joined: 04/10/2019
Location: Australia
Posts: 586

Posted: 01:44pm 06 Oct 2023

Copy link to clipboard

Print this post

Thanks Mike. RS has the MJE200(210)G, unfortunately in lots of 25 only.

I appreciate your input, I'm better at building projects rather than designing them, so picking the right part is not always easy.

tinyt
Guru

Joined: 12/11/2017
Location: United States
Posts: 431

Posted: 01:53pm 06 Oct 2023

Copy link to clipboard

Print this post

For what it is worth, the chinese inverter I am testing uses complementary pairs 2SD882/2SB772 driving 6 HY4008 mosfets.

nickskethisniks
Guru

Joined: 17/10/2017
Location: Belgium
Posts: 418

Posted: 09:05pm 06 Oct 2023

Copy link to clipboard

Print this post

Other options used in drivers:

TIP41 and TIP42
MJD44h11 and MJD45h11

Solar Mike
Guru

Joined: 08/02/2015
Location: New Zealand
Posts: 1126

Posted: 09:47pm 06 Oct 2023

Copy link to clipboard

Print this post

Looking at the data sheets for those suggested types, order of preference would be;

MJE200G(NPN), MJE210G(PNP)
2SD882/2SB772
MJD44h11 and MJD45h11

TIP41 and TIP42 -Don't use these, very slow and high CE sat voltage

Cheers
Mike

InPhase

Senior Member

Joined: 15/12/2020
Location: United States
Posts: 178

Posted: 12:03am 07 Oct 2023

Copy link to clipboard

Print this post

The MJE3055T/MJE2955T combo work very well as FET buffer transistors and are readily available in single quantities from my suppliers.

Print this page

To reply to this topic, you need to log in.