TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 01:07 14 Jul 2025	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Electronics : 36v / 48v controller circuits

Author

Message

Willie
Newbie

Joined: 03/04/2012
Location: South Africa
Posts: 2

Posted: 08:38pm 04 Apr 2012

Copy link to clipboard

Print this post

Hi Down Under. I have built two 1.2 kw turbines but I battle with the electronics. Could anyone please help with circuits for 36v and 48v (simple) mill controllers, similar to the 12v controller on the site. I have no idea what should be changed to have the 12v work on the 36 and 48 v mills. Will appreciate any input. Thanks. Willie

Gizmo

Admin Group

Joined: 05/06/2004
Location: Australia
Posts: 5116

Posted: 10:58pm 17 Apr 2012

Copy link to clipboard

Print this post

Hi Willie

I get a few requests for this but I just dont have the spare time to look into it. You should be able to use any of the controller circuits on this site with a series regulator like Warpspeed posted on this page....

http://www.thebackshed.com/forum/forum_posts.asp?TID=4732&PN =2

But it will require some experimentation.

Glenn

The best time to plant a tree was twenty years ago, the second best time is right now.
JAQ

Willie
Newbie

Joined: 03/04/2012
Location: South Africa
Posts: 2

Posted: 09:51am 19 Apr 2012

Copy link to clipboard

Print this post

Hi Glenn

Thanks for the advice, will try it out and let you know (what did not explode...!!)

Print this page

To reply to this topic, you need to log in.