TheBackShed.com

Home	JAQForum Ver 24.01
Log In or Join
Active Topics
Local Time 04:53 03 May 2025	Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : For Sale : Aerosharp 3kW Torroids

Author

Message

KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178

Posted: 12:17am 03 Jan 2017

Copy link to clipboard

Print this post

as the title suggests

Outer 250V Winding removed leaving 230V windings behind + Mylar and copper shield.

Possibly now suitable for an oz-inverter type build, re-winding with a much Heavier Primary to allow use as an off grid inverter.

Asking $50 / pop + Freight. (was getting $20 / unit as simple scrap).
decent amount of work removing the outer and removing it from the inverter and typically the saving in freight cost more than makes up for the increase in cost of the torroid.

suggest project like this only suitable for experienced players.

More than 4 available now as described above.

I also have perhaps a dozen brand new Aerosharp 2kW 2 MPPT inverters, asking $350/ pop (+ freight from Perth should be $50-75 most places in Aus) and given they cost about $1500 new, i make that a bargain for a gurilla solar install or an OZ inverter build of some kind :)

Good luck - will be salvaging more this year as they come through - think some 50+ units available this year.

KarlJ

Luck favours the well prepared

shallowal
Regular Member

Joined: 26/07/2018
Location: Australia
Posts: 58

Posted: 11:46pm 17 Sep 2018

Copy link to clipboard

Print this post

I realise this AD is 20 months old, but do you still have any?.

Allan

Print this page

To reply to this topic, you need to log in.