Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 22:33 03 May 2025 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Wanted : need

Author Message
DTV004

Regular Member

Joined: 30/04/2009
Location: United States
Posts: 65
Posted: 05:16am 20 Nov 2009
Copy link to clipboard 
Print this post

hi i need a regulator for my wind mill to charge my battery's 12v big amp's with display in working conditions. used is ok low price please..
 
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 02:38am 06 Dec 2009
Copy link to clipboard 
Print this post

get a PL 20 and wire it for wind 2.
looks after batts via a dumpload using as large as you like external relay to turn on the dump load

they come up on ebay for $300 or Trev from foundry and Fiberglass has them too.

they are reliable and best of all do all the good things for long batt life.

Karl
Luck favours the well prepared
 
donnaj8887

Newbie

Joined: 17/08/2010
Location: Afghanistan
Posts: 1
Posted: 08:37am 17 Aug 2010
Copy link to clipboard 
Print this post

  DTV004 said   hi i need a regulator for my wind mill to charge my battery's 12v big amp's with display in working conditions. used is ok low price please..


Thanks you for the post.


Edited by donnaj8887 2010-08-18
Watch The Switch Online Free
 
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2025