Home
JAQForum Ver 20.06
Log In or Join  
Active Topics
Local Time 23:55 29 Apr 2024 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Wanted : Copper wire

Author Message
fernbrae 1

Newbie

Joined: 19/01/2009
Location: Australia
Posts: 22
Posted: 09:25pm 31 Jan 2009
Copy link to clipboard 
Print this post

Hi gentlemem,
does anybody know where to buy the copper wire used for making windings for an alternator Please.
This has proved difficult , I am in melbourne.

Regards
Greg
loving life lets be active .
 
brucedownunder2
Guru

Joined: 14/09/2005
Location: Australia
Posts: 1548
Posted: 10:00pm 31 Jan 2009
Copy link to clipboard 
Print this post

Hi Greg, Try this , Yellow pages and find a motor re-wirer in your area, go along ,maybe with a six pack or a dozen beers, and ask if you could exchange them for some "end-of spool" copper winding wire that they can't use . Take along your stator and explain what you are doing ,you might find the boss very interested,thats what I did.
If you don't get enough wire on one spool ,you could join and solder lengths together and heatshrink over the joint ,reckon for our purposes, this is satisfactory--Bruce ducks,lol.

Best of luck

Bruce.
Bushboy
 
fernbrae 1

Newbie

Joined: 19/01/2009
Location: Australia
Posts: 22
Posted: 04:34am 01 Feb 2009
Copy link to clipboard 
Print this post

Thanks Bruce ,
that is a neat idea I will give this a try .
Rgds
Greg
loving life lets be active .
 
KarlJ

Guru

Joined: 19/05/2008
Location: Australia
Posts: 1178
Posted: 11:39am 02 Dec 2009
Copy link to clipboard 
Print this post

I've got 0.8mm x 1.3KGs of the stuff was going to scrap it.

3 lengths couple of spots the enamelling aint too hot but could be fixed,

you can have it for nothing.
even though its worth $10 in scrap

Better it finds a new life

Karl
Luck favours the well prepared
 
Print this page


To reply to this topic, you need to log in.

© JAQ Software 2024