TheBackShed.com

Forum Index : Microcontroller and PC projects : Armmite L4: 5.05.04 STM32L476 support

Page 2 of 2

Author

Message

panky

Guru

Joined: 02/10/2012
Location: Australia
Posts: 1115

Posted: 10:02pm 11 Jan 2019

Copy link to clipboard

Print this post

Thanks Peter,

SSD1306i2c works perfectly on L476 now.

Doug.

... almost all of the Maximites, the MicromMites, the MM Extremes, the ArmMites, the PicoMite and loving it!

djuqa

Guru

Joined: 23/11/2011
Location: Australia
Posts: 447

Posted: 09:59am 12 Jan 2019

Copy link to clipboard

Print this post

I have a SSD1306 & LCD 20x4 I2C both working via I2C on Arduino a4/a5 pins working perfectly on my NUCLEO64 using the STMDuino support on Arduino IDE.

VK4MU MicroController Units

geeken
Newbie

Joined: 13/01/2018
Location: United States
Posts: 20

Posted: 10:32pm 15 Jan 2019

Copy link to clipboard

Print this post

Hi Peter

A great choice of board - thanks for this next gem :)

I notice that there is also a L496 Nucleo board with a SMPS regulator onboard (to get reasonable efficiencies from the battery circuit). I.e. ;

NUCLEO-L496ZG-P

Any chance of getting an O/S version out for this Nucleo, too ?

It has a Meg of flash & about 320k of SRAM.

Also it has a better Errata list than the L476, from memory.

I appreciate your considering it - - -

Cheers
Ken

* *

sagt3k

Guru

Joined: 01/02/2015
Location: Italy
Posts: 313

Posted: 06:17pm 31 Mar 2019

Copy link to clipboard

Print this post

Hi matherp
- Do you think that in the future it will be possible to implement SD i/o as MMX?
- Is it possible to think Armmite MMBasic on L476VGx 100pins?
Thanks
Antonio

matherp
Guru

Joined: 11/12/2012
Location: United Kingdom
Posts: 10315

Posted: 06:30pm 31 Mar 2019

Copy link to clipboard

Print this post

Quote - Do you think that in the future it will be possible to implement SD i/o as MMX?
- Is it possible to think Armmite MMBasic on L476VGx 100pins?

No and no: sorry. There isn't enough flash on the stm32L43x chips which mean it would be a different version and I already have too many to support. If you want bigger chip and SD card then the Armmite H7 has them and, of course, the MMX is pretty good by itself.

sagt3k

Guru

Joined: 01/02/2015
Location: Italy
Posts: 313

Posted: 06:55pm 31 Mar 2019

Copy link to clipboard

Print this post

Hi matherp
Sorry, I had not specified, the request was for L476xx
Thanks

Page 2 of 2

Print this page

To reply to this topic, you need to log in.