 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : Take care experimenting with a Raspberry Pico
  Page 2 of 2 |
|||||
| Author | Message | ||||
stanleyella Guru  Joined: 25/06/2022 Location: United KingdomPosts: 2570 |
@nbrok - nice board, any more info please? just out of interest, I like strip board :) |
||||
Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 7939 |
We've noticed your love of strip board. :) Had you noticed that it's cheaper to get five 100x100mm PCBs from JLCPCB than it is to buy the same area of strip board? I was surprised when I found that. Providing you need five the same it's a very good deal.  Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| JohnS Guru Joined: 18/11/2011 Location: United KingdomPosts: 4044 |
Lay out as stripboard & send to JLCPCB? John |
||||
| Mixtel90 Guru Joined: 05/10/2019 Location: United KingdomPosts: 7939 |
I prefer the approach of creating a board that can be reconfigured to do different things. e.g. have either a VGA connector or a LCD connector, have SD or micro SD. That way you can use five boards in five different ways. :) Mick Zilog Inside! nascom.info for Nascom & Gemini Preliminary MMBasic docs & my PCB designs |
||||
| stanleyella Guru Joined: 25/06/2022 Location: United KingdomPosts: 2570 |
my vga picomite is still on stripboard as it's not permanent, takes up too much space and I use the lcd boards more so they're soldered for stability. Pcbs are permanent, can't add stuff or adapt them.  |
||||
| Page 2 of 2 |
|||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
