 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : MMBasic V6.03.00 release candidates
  Page 27 of 27 |
|||||
| Author | Message | ||||
| matherp Guru  Joined: 11/12/2012 Location: United KingdomPosts: 11523 |
V6.03.00RC22 PicoMiteRP2040V6.03.00RC22.zip PicoMiteRP2350V6.03.00RC22a.zip PicoMiteRP2350V6.03.00RC22b.zip Bug fix to MATH(CROSSING function Changes to stepper command to fix missing steps Changes to support the same CSUB running on both RP2040 and RP2350 Additional internal functions exposed though PicoCFunctions.h Allows * to be used without any parameters to run the current program |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 11523 |
V6.03.00RC23 PicoMiteRP2040V6.03.00RC23.zip PicoMiteRP2350V6.03.00RC23a.zip PicoMiteRP2350V6.03.00RC23b.zip Fixes potential memory alignment issue when using OPTION GUI CONTROLS Changes an internal library which reduces the flash footprint Harm: check the min build  Note: this build will be the release unless anyone finds another bug. There will be no further functional changes |
||||
| JanVolk Guru Joined: 28/01/2023 Location: NetherlandsPosts: 381 |
I updated to PicoMiteHDMI MMBasic USB RP2350A Edition V6.03.00RC23 But I am having problems transferring files using FM and selecting and copying with F5. I also performed a flash nuck, which didn't help. I don't even have video anymore, so I performed an option reset on the Olimex USB. Now I have picture again and FM seems to be working, but restoring the backup from b: to a: causes the entire system to be reset. FM is no longer working. > memory Program: 0K ( 0%) Program (0 lines) 156K (100%) Free Saved Variables: 16K (100%) Free RAM: 0K ( 0%) 0 Variables 0K ( 0%) General 202K (100%) Free > > US USB Keyboard Connected on channel 1 > Mouse Type: Gaming 16-bit X/Y bits: 16/16 Buttons: 5 Report length: 10 bytes Has wheel: Yes (byte 5) Haspan: No USB Mouse Connected on channel 2 > memory Program: 0K ( 0%) Program (0 lines) 156K (100%) Free Saved Variables: 16K (100%) Free RAM: 0K ( 0%) 0 Variables 0K ( 0%) General 189K (100%) Free > fm Error : FM needs at least 8 rows > fm Error : FM needs at least 8 rows > b: > files B:/ <DIR> backup <DIR> backup-A-RP2350 <DIR> Backup-Olimex-RP2350HDMIUSB <DIR> backup2040 <DIR> backup2350hdmi <DIR> backup2350w <DIR> backup3 <DIR> data So I'm just going back to V6.03.00RC21 Now FM is working fine again What I also noticed is that option disk load "V5.03.00RC21.opt" isn't working properly anymore? So, with some copies of the option list still in Notepad++ and transferring line by line via Tera Term, I have it back in order. Now I just have to wait and see if I'm the only one with these problems? > option list PicoMiteHDMI MMBasic USB RP2350A Edition V6.03.00RC21 OPTION SERIAL CONSOLE COM1,GP0,GP1 OPTION SYSTEM I2C GP20,GP21 OPTION FLASH SIZE 16777216 OPTION COLOURCODE ON OPTION DEFAULT COLOURS GREEN, BLACK OPTION MOUSE SENSITIVITY 1.0000 OPTION KEYBOARD US OPTION HEARTBEAT OFF OPTION PICO OFF OPTION RESOLUTION 1280x720 @ 372000KHz OPTION DISPLAY 30, 80 OPTION HDMI PINS 1, 3, 7, 5 OPTION GUI CONTROLS 100 OPTION SDCARD GP22, GP6, GP7, GP4 OPTION AUDIO GP26,GP27', ON PWM CHANNEL 5 OPTION RTC AUTO ENABLE OPTION MODBUFF ENABLE 192 OPTION F1 help OPTION F5 list commands OPTION F6 list functions OPTION F7 list pins OPTION F8 option list OPTION F9 fm OPTION PLATFORM OLIMEX USB OPTION DEFAULT FONT 3, 1 Jan. |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 11523 |
Option disk load can't always work between versions, sometimes it can but you should assume NOT and set the options by hand with any new version |
||||
| JanVolk Guru Joined: 28/01/2023 Location: NetherlandsPosts: 381 |
Peter, I had previously saved "V6.03.00RC21.opt" using option disk save, and after the problems, I reloaded V6.03.00RC21 using option disk load "V6.03.00RC21.opt", after which the pico started up but there was no video, so I blind option reset olimex usb (enter) y (enter) Reset and the picture returned. After that, I manually copied the list line by line from notepad++ and pasted it into Tera Term. Jan. |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 11523 |
Looks like a stack overflow issue - will fix |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 5936 |
Peter, The MIN build rc23 is okay for Game*Mite. Volhout PicomiteVGA PETSCII ROBOTS |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 11523 |
did you notice you have 16K more A: drive? |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 5936 |
Aha, I guessed so, since I could add Nobukun's shooter game (16k) to the image, and still have space for the high-score folder, and files with scores. Thanks, the Game*Mite has more value now , simply because there are more games in it. More fun to play. When the official release is same, I can release the 2040 uf2 image. Tom will be happy... And I will also add a zip that can be installed on the sd card, that contains the games that are too large to fit Petscii, Gems and Rocks, Maxitrek, etc... Volhout P.s. with these changes the Game*Mite Petscii runs faster than the VGA version. Edited 2026-06-23 05:34 by Volhout PicomiteVGA PETSCII ROBOTS |
||||
| Page 27 of 27 |
|||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2026 |
