Home
JAQForum Ver 24.01
Log In or Join  
Active Topics
Local Time 04:20 23 Nov 2026 Privacy Policy
Jump to

Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.

Forum Index : Microcontroller and PC projects : Colour Maximite 2 (CMM2): Version 7.00.00 betas

     Page 3 of 3    
Author Message
darthvader
Senior Member

Joined: 31/01/2020
Location: France
Posts: 106
Posted: 10:14pm 03 Nov 2026
Copy link to clipboard 
Print this post

It's not really 'proprietary' , it's the official board from stmicro , they made the same one without the mipi dsi screen too.
I think the main difference with the H743/753 is that the H747i got two core , one cortex M7 and one cortex M4.
For the rest it's normaly the same  

Darth
Theory is when we know everything but nothing work ...
Practice is when everything work but no one know why ;)
 
JohnS
Guru

Joined: 18/11/2011
Location: United Kingdom
Posts: 4404
Posted: 07:43am 04 Nov 2026
Copy link to clipboard 
Print this post

Are all the I/O devices including clocks etc the same from a software viewpoint and at the same addresses etc?

I doubt it.

Peter may support it, I don't know.

John
 
Volhout

Guru

Joined: 05/03/2018
Location: Netherlands
Posts: 6277
Posted: 08:15am 04 Nov 2026
Copy link to clipboard 
Print this post

  JohnS said  Are all the I/O devices including clocks etc the same from a software viewpoint and at the same addresses etc?

I doubt it.

Peter may support it, I don't know.

John


What do you think ? It has a MIPI screen. Thus a different graphics block. On the Arduino Pro boards there is a H757 (it is not a 747 I know) that has HDMI built in.
Most likely MMBasic needs a port to that board, and the current image will not work.

Volhout
PicomiteVGA PETSCII ROBOTS
 
     Page 3 of 3    
Print this page


To reply to this topic, you need to log in.

The Back Shed's forum code is written, and hosted, in Australia.
© JAQ Software 2026