 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : PicoMite V6.00.02 release candidates - all versions
  Page 48 of 48 |
|||||
| Author | Message | ||||
| mozzie Senior Member  Joined: 15/06/2020 Location: AustraliaPosts: 118 |
G'day, Peter, think you may have got the threads mixed up... or are you trying to tell me something...  (I could be brighter)Volhout, thanks for testing, can you try setting: option colourcode off And testing again, works ok in colour but not in monochrome. Edit: Also affects HDMI in monochrome. Regards, Lyle. Edited 2025-05-28 06:38 by mozzie |
||||
| Volhout Guru  Joined: 05/03/2018 Location: NetherlandsPosts: 4945 |
Lyle, I can confirm, with option colourcode off , the mouse cursor is 8x16, and does not line up with the text in the editor. Colourcode off .. who would have thought of that one. I never used It since colourcode was introduced. Peter… a small one for you to fix probably.. Volhout . I actually like the mouse. Going to adapter Some games for It… or port some of William Leue's CMM2 games. Some of these can only be played with mouse. Edited 2025-05-28 15:41 by Volhout PicomiteVGA PETSCII ROBOTS |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 10110 |
Harm Please can you check if this fixes it? If not I will probably block the mouse completely in the editor when colourcode is off PicoMiteVGA.zip |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 4945 |
Hi Peter, I can tonight. Currently on customer visit. Volhout P.S. Is colourcode off really different from colourcode on? I had imagined that the only difference is that the tiles do not change color, but stay black/white. Edited 2025-05-28 17:42 by Volhout PicomiteVGA PETSCII ROBOTS |
||||
| Volhout Guru Joined: 05/03/2018 Location: NetherlandsPosts: 4945 |
@Peter, Yes, that fixed it. Now the mouse cursor is correct on both colorcode ON and OFF. Volhout PicomiteVGA PETSCII ROBOTS |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 10110 |
V6.00.02RC25 is available on https://geoffg.net/Downloads/picomite/PicoMite_Beta.zip Fixes 3 small bugs in the editor |
||||
| mozzie Senior Member Joined: 15/06/2020 Location: AustraliaPosts: 118 |
G'day, Thanks Peter and Volhout for sorting that out, another one squashed  Also apologies for the poor attempt at humor above, comedian I aint  Regards, Lyle. |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 10110 |
RC25 Updated due to F2 in editor not working |
||||
| mozzie Senior Member Joined: 15/06/2020 Location: AustraliaPosts: 118 |
G'day Peter, Hope you don't mind me asking this here. Can you please confirm the mouse functionality in the latest firmware versions is strictly VGA / HDMI and is not going to be extended to the parallel LCD panels? As Volhout mentioned, I didn't miss the mouse functions before, but now we have them its hard to go back. Looking at display options for a project and if the SSD1963 is still worth looking at, they are a good display but getting pricey and limited options for IPS etc. Thanks again for the time and energy you put into this project. Regards, Lyle. |
||||
| matherp Guru Joined: 11/12/2012 Location: United KingdomPosts: 10110 |
Yes They are great if you need speed but the physical displays tend to be old and poor viewing angles/brightness |
||||
| Page 48 of 48 |
|||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
