 Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me. |
Forum Index : Microcontroller and PC projects : CMM2: GetFileDialog Box
  Page 4 of 4 |
|||||
| Author | Message | ||||
| lizby Guru  Joined: 17/05/2016 Location: United StatesPosts: 3378 |
That's Teraterm from an Armmite F4, default font using the PRINT command (I'm not sure you can change the font for PRINT, just for TEXT to the LCD). While we're at this, can anyone explain why the following code doesn't properly print the upper left box character for single and double lines, and the lower left for double? If I precede the corner character with a space, it prints properly.  print chr$(218);: for i=1 to 10: print chr$(196);: next i: print chr$(191) print chr$(179);: for i=1 to 10: print " ";: next i: print chr$(179) print chr$(179);: for i=1 to 10: print " ";: next i: print chr$(179) print chr$(192);: for i=1 to 10: print chr$(196);: next i: print chr$(217) print chr$(201);: for i=1 to 10: print chr$(205);: next i: print chr$(187) print chr$(186);: for i=1 to 10: print " ";: next i: print chr$(186) print chr$(186);: for i=1 to 10: print " ";: next i: print chr$(186) print chr$(200);: for i=1 to 10: print chr$(205);: next i: print chr$(188) print chr$(218);: for i=1 to 10: print chr$(196);: next i: print " "+chr$(191) print chr$(179);: for i=1 to 10: print " ";: next i: print chr$(179) print chr$(179);: for i=1 to 10: print " ";: next i: print chr$(179) print chr$(192);: for i=1 to 10: print chr$(196);: next i: print chr$(217) print chr$(201);: for i=1 to 10: print chr$(205);: next i: print " "+chr$(187) print chr$(186);: for i=1 to 10: print " ";: next i: print chr$(186) print chr$(186);: for i=1 to 10: print " ";: next i: print chr$(186) print chr$(200);: for i=1 to 10: print chr$(205);: next i: print " "+chr$(188) PicoMite, Armmite F4, SensorKits, MMBasic Hardware, Games, etc. on fruitoftheshed |
||||
CircuitGizmos Guru Joined: 08/09/2011 Location: United StatesPosts: 1427 |
Here is CMM2 Font #1 that you can install in Windows and set in Tera Term: CMM2f1.zip Micromites and Maximites! - Beginning Maximite |
||||
| Page 4 of 4 |
|||||
 Print this page |
 |
The Back Shed's forum code is written, and hosted, in Australia. | © JAQ Software 2025 |
