Notice. New forum software under development. It's going to miss a few functions and look a bit ugly for a while, but I'm working on it full time now as the old forum was too unstable. Couple days, all good. If you notice any issues, please contact me.
|
Forum Index : Microcontroller and PC projects : CMM2 Manual Errata
Page 6 of 6 | |||||
Author | Message | ||||
TassyJim Guru Joined: 07/08/2011 Location: AustraliaPosts: 5905 |
Look at the values before putting them on screen. BEIGE is RGB(245,245,220) mode 1,12 PRINT "BLACK ";: parts(RGB(BLACK)) PRINT "BLUE ";: parts(RGB(BLUE)) PRINT "GREEN ";: parts(RGB(GREEN)) PRINT "CYAN ";: parts(RGB(CYAN)) PRINT "RED ";: parts(RGB(RED)) PRINT "MAGENTA ";: parts(RGB(MAGENTA)) PRINT "YELLOW ";: parts(RGB(YELLOW)) PRINT "BROWN ";: parts(RGB(BROWN)) PRINT "GRAY ";: parts(RGB(GRAY)) PRINT "LIGHTGRAY ";: parts(RGB(LIGHTGRAY)) PRINT "WHITE ";: parts(RGB(WHITE)) PRINT "ORANGE ";: parts(RGB(ORANGE)) PRINT "PINK ";: parts(RGB(PINK)) PRINT "GOLD ";: parts(RGB(GOLD)) PRINT "SALMON ";: parts(RGB(SALMON)) PRINT "BEIGE ";: parts(RGB(BEIGE)) PRINT "NOTBLACK ";: parts(RGB(NOTBLACK)) do:loop until inkey$<>"" SUB parts(COL AS INTEGER) PRINT STR$((col >> 16) AND &hFF,5);STR$((col >> 8) AND &hFF,5);STR$(col AND &hFF,5);STR$((col >> 24) AND &hF,5); pixel 400,100,col colx=pixel(400,100) print " =";STR$((colx >> 16) AND &hFF,5);STR$((colx >> 8) AND &hFF,5);STR$(colx AND &hFF,5);STR$((colx >> 24) AND &hF,5) END SUB Edited to show colour values before and after PIXEL functions. Try different MODEs Jim Edited 2021-03-23 10:08 by TassyJim VK7JH MMedit MMBasic Help |
||||
Page 6 of 6 |
Print this page |